Gallery Harwoods Tonewoods Page

"Specialist in Figured, Unique and Tone Woods"

ELECTRIC GUITAR

SOLID BODY WOOD
NOTE: WE CAN MILL TO YOUR CUSTOM SIZE AND THICKNESS

DIMENSIONS:
1-piece (surfaced)
20" - 22" X 13-1/2" X 1-3/4"

2 PIECE GUITAR BODY BLANK
Thickness-sanded joined body blank, sufficient for a Strat or Tele-size body and ready for bandsawing and routing. Approximately 1-3/4" X 13-3/4" X 20".
Mahogany
Alder, 2-pc
Swamp Ash, 2-pc
Walnut
Korina (Limba)

TOP WOOD FOR SOLIDBODY GUITAR (DROP TOPS)
¼" - 1" X 7" X 20" book-matched 2-piece sets. For joining, profiling and gluing to a solidbody guitar face.

(Partial list)
Big Leaf Maple;
Burl, Quilt, Flamed
Blister Quilt, Blackline Spalted,
"and other Drop Dead Figures"
Hawiian, Koa Figured
Myrtle, Figured or Spalted
Australian Lacewood
Redwood, Flamed
Redwood, Lace Burl
Claro Walnut, Figured
Birds Eye, Rock Maple
Bubinga, Figured
Coco Bolo Rosewood
Mango (Limited)
Oak, Flamed (Limited)

Quilted Bigleaf Maple

We custom build
Body Blanks

ACOUSTIC BACK/SIDE SETS

BACKS AND SIDES

GUITAR
DIMENSIONS:

NOTE: SIZES ARE SOMEWHAT INDUSTRY STANDARDS.
HOWEVER, WE MILL ALL CUSTOM SIZES ON ORDER.

CLASSIC:

BACKS: 21" X 7-1/2"
SIDES: 30" X 4-1/4"

STEEL STRING:

BACKS: 22" X 8"
SIDES: 32" X 4 1/2 - 5"

WOODS
(Partial list)
COCOBOLO ROSEWOOD

CYPRESS, MONTERY

AFRICAN KHAYA MAHOGANY

HONDO MAHOGANY

MAPLE, BIGLEAF, ROCK BIRDS EYE
Bigleaf, Best Figure
Bigleaf, Medium Figure
Bigleaf, Quilt
Rock, Birdseye

WALNUT, CALIFORNIA CLARO
Walnut, Special Figure
1st Grade, Good Color / Figure
2nd Grade, Good Color

HAWAIIAN KOA
Koa, Special High Flame
Koa, Good Figure
Koa, Good Color some Figure

BUBINGA (African Rosewood)
Figured, Quartered

KORINA (Limba)
(Limited)

OAK, QUARTER FLAMED (Limited)

ARCH BACK GUITAR

DIMENSIONS:
Backs: 8-1/2" -9" X 22" X 1"
2 Piece, Bookmatched
Sides: 3" - 5" X 35"
Bigleaf, Good Flame
Bigleaf, Medium Flame

Octove Mandolin
Coco Bolo 3piece back with maple strip
by: Arnie Gamble

Flame Maple Archback
by: Michael Lewis

Koa, Special Flame

ARCH BACK MANDOLINS (OR VIOLINS)

DIMENSIONS:
Backs: 6" X 16" X 7/8" (2 pcs)
Sides: 2" X 28"" X
Solid Arch Back Blank: 11" - 12" X 16" X 1"+
Bigleaf, Good Flame
Bigleaf, Medium Flame
Bigleaf, Quilt

Electric Mandolin one piece quilted maple top

NOTE: Listed sizes are general industry standards. We can mill all custom sizes.
Many woods (including Brazilian Rosewood) can be "set-matched" from the same billet.(Finger Board, Bridge Blank and Head Plate)

FINGER BOARDS

DIMENSIONS:

Standard: 18-1/2" - 20" X 2-3/4" X 5/16"

Steel / Elec.: 20" - 21" X 2-5/8" X 5/16"

Wide: 20" - 21" X 3+" X 5/16"

Bass, Banjo, Etc: 26-1/4" - 28" X 2-3/4" X 3/8"

6-String Bass: 27" -32" X 3-1/2"- 4+" X 3/8"

Mandolin: 12" X 2" X ¼"

WOODS

Brazilian Rosewood Curly Purpleheart Pau Ferro Ebony	Kingwood, Quartered Birds Eye Maple (White) Madagascar Rosewood Honduran Rosewood
(Others Available)

HEAD PLATES

DIMENSIONS:
7-1/2" X 3-1/4"- 4" X 3/32"
(Custom sizes milled)

WOODS
Brazilian Rosewood
Ebony
Holly
Maple, Curly
Maple, Birds Eye
Curly Koa
Others Available...

Some Headplates Available in Stabilized Woods

BRIDGE BLANKS

Classic: 7-3/4" X 1-1/2" X 5/16"

Jumbo: 6-1/2" X 1-3/4" X 3/8"

12-String: 7-1/2" X 2+" X 3/8"

WOODS
Brazilian Rosewood
Ebony
Madagascar Rosewood
African Blackwood

BRACE WOOD

DIMENSIONS:
Roughly equivalent to 19" - 22" X 1-1/2" square
or 1 1/2" X 3" X 24"

WOODS
Engelmann Spruce
Mahogany
Sitka Spruce

PICK GUARDS

Custom sizes available.
Birdseye Maple
Flamed Koa
Flamed Maple
Spalted Maple
Holly (White)
(Some available in stabilized woods)

SOUNDBOARDS

GUITAR SOUNDBOARDS

DIMENSIONS:
CLASSIC: 21" X 7-1/2" x 3/16"
STEEL STRING: 22" X 8-1/4" x 3/16"
2 pieces, book-matched

Grades: Best or Fine

SITKA SPRUCE

ENGELMANN SPRUCE

REDWOOD

PORT ORFORD CEDAR (LIMITED)
(LAWSON CYPRESS)

MAHOGONY (Hondo or African)
Quarter Ribbon Stripe

ARCH TOP GUITARS

DIMENSIONS:
8-1/2" - 9" X 22-1/2" X 1+" at center (2 pieces, book-matched)

Grade: Best or Fine

SITKA SPRUCE
ENGLEMANN SPRUCE
REDWOOD

ARCH TOP MANDOLIN OR VIOLIN (Wedges ready for splitting or sawing, or 2 pieces sawn, book-matched) DIMENSIONS: 5" - 6" X 15" X 2" AT CENTER (MINIMUM) Grade: Best or Fine
SITKA SPRUCE 2 piece	ENGELMANN SPRUCE 2 piece or wedge

Sitka spruce top - flame maple back
by: Arnie Gamble

Dulcimer Soundboard Wood
Thickness-sanded Sitka spruce or Redwood in a book-matched 2-piece set for making a dulcimer soundboard. Each half measures approximately 4" x 32" x 1/8". The set is supplied filed (rectangular) for gluing, joining and custom cutting in your shop.

NECK STOCK

GUITAR NECK STOCK
DIMENSIONS:
For 1-piece neck: 30" x 4" x 3"
For laminating: 24" x 3" x 7/8"
Long: 30" x 3" x 7/8"
Heel blocks: 12+" x 3" x 7/8"
End blocks: 5 1/8" X 3" X 7/8"

WOODS
Maple, Bigleaf Flamed
Cedar
Mahogony
Rock Maple, Flamed
Walnut
Korina (Limba)
Wenge, Quartered

MANDOLIN / VIOLIN NECK
DIMENSIONS:
16" X 2-1/2" X 2-1/2"
Curly Maple, Rock or Bigleaf

BANJO / ELECTRIC NECK
DIMENSIONS:
BIGLEAF MAPLE or ROCK MAPLE
30" X 3" X 2" FLAMED
30" X 3" X 3" FLAMED

BIRDS EYE, ROCK MAPLE
(OUR SPECIALITY)
5A ALL WHITE
CUSTOM MILLED TO YOUR ORDER
(IF YOU NEED A 48" WHITE BIRDS EYE NECK -
WE'RE YOUR SUPPLIER !!! )

(Birds Eye Maple)